Skip to content
Roof and wall cladding solutions · Istanbul, Türkiye +90 216 405 16 90 +90 532 424 38 20 info@rformmetal.com

Our profiles

27/200 Trapezoidal Sheet
Roof and wall trapezoidal sheet

27/200 Trapezoidal Sheet

A single-skin roof and wall sheet with a 27 mm rib height, available in 1000 mm or 800 mm cover width, for buildings that need no insulation.

Rib height
27 mm
Cover width
1000 mm
800 mm alternative
Thickness
0.50–1.20 mm
Datasheet, drawing and load table (Turkish page) →
38/151 Trapezoidal Sheet
Roof and wall trapezoidal sheet

38/151 Trapezoidal Sheet

A classic, rigid roof and wall profile with closely spaced ribs and a 906 mm cover width across seven ribs.

Rib height
38 mm
Cover width
906 mm
Thickness
0.50–1.20 mm
Datasheet, drawing and load table (Turkish page) →
50/980 Composite Deck
Composite floor deck

50/980 Composite Deck

A deck profile for composite floor slabs: it works as formwork, acts as reinforcement and provides a working platform, allowing a thinner slab section.

Rib height
50 mm
Cover width
980 mm
Thickness
0.60–1.50 mm
Datasheet, drawing and load table (Turkish page) →
70/915 Composite Deck
Composite floor deck

70/915 Composite Deck

A 70 mm deck profile with embossed ribs that improve the bond between concrete and steel, for wide-span and heavily loaded slabs.

Rib height
70 mm
Cover width
915 mm
Thickness
0.60–1.50 mm
Datasheet, drawing and load table (Turkish page) →
153/840 Trapezoidal Sheet
Roof and wall trapezoidal sheet

153/840 Trapezoidal Sheet

A load-bearing profile with a 153 mm rib height, made to order, that reduces the number of purlins in wide-span steel buildings.

Rib height
153 mm
Cover width
840 mm
Thickness
0.60–1.50 mm
Datasheet, drawing and load table (Turkish page) →
Standard Standing Seam
Standing seam system

Standard Standing Seam

Roof and wall cladding fixed with concealed clips and seamed at the edges by a seaming robot; panels are made in one piece, so there is no joint along the length.

Seam height
25 mm
Pan widths
320 / 420 / 520 mm
Material
Painted galvanised steel, painted aluminium coil
Datasheet, drawing and load table (Turkish page) →

See all 12 profiles →

Your length, thickness and colour

Every profile is produced to order. Length, sheet thickness (from 0.50 mm), galvanising class and paint type are chosen for your project, and a wide RAL range is available with special colours on request. If the profile or bent part you need is not on the list, send a drawing.

From your list to shipment

  1. Send your list
    Profile, thickness, colour, lengths and quantities, or a drawing. Use WhatsApp, e-mail or the form on this site.
  2. We check and quote
    We go through the details with you and send a written quotation. Freight to the delivery address is quoted separately unless the quotation says otherwise.
  3. Production and shipment
    Sheets are produced to order and shipped from Istanbul, Türkiye.

Tell us about your project

Have the profile, thickness, colour and length list ready, then send them to us. We reply with a written quotation.

Request a quote
Write on WhatsApp
Call WhatsApp Quote